COMPLETE SPECIFICATIONS SYSTEM OVERVIEW System overview: 1500VA/900W line-interactive UPS with LCD status screen, 8 UPS-supported AC outlets, 3-line 2.2 GHz cable/satellite/antenna coaxial surge protection, single-line tel/DSL/Ethernet surge protection, USB port with HID protocol support, DB9 serial port, complete cabling and FREE PowerAlert Software (Web download) Voltage compatibility: 120 VAC Frequency compatibility: 60 OUTPUT Output volt amp capacity (VA): 1500 Output watt capacity (watts): 900 Output nominal voltage: 120 VAC Output voltage regulation: BATTERY MODE: PWM sine wave 115V +/-5% Output frequency regulation: LINE MODE: Passes line frequency of 60Hz +/-10% BATTERY MODE: Inverter output regulated to 60Hz +/-0.5Hz Outlet quantity / type: 8 x NEMA 5-15R Overload protection: 10A input circuit breaker INPUT Maximum input amps: 8.5 Input connection type: NEMA 5-15P space saving right angle plug Input cord length: 6 ft./1.8m Recommended electrical service: 120V 15A BATTERY Full load runtime: 3.5 min. (900W) Half load runtime: 13 min. (450W) Typical battery lifespan: 4-6 years (depending on usage) Battery recharge rate: 2-8 hours to 90% VOLTAGE REGULATION Voltage regulation description: Automatic Voltage Regulation (AVR) circuits maintain clean, regulated computer-grade 120V nominal output, without using battery power, during brownouts to 75V and overvoltages to 147V Overvoltage correction: Input voltages between 128VAC and 147VAC are reduced by 12% Brownout correction: Input voltages between 93VAC and 107VAC are boosted by 14% Severe brownout correction: Input voltages between 75VAC and 92VAC are boosted by 30% LEDS ALARMS & SWITCHES Front panel LEDs: Front panel LCD screen with blue backlight offers continuous input line voltage data, plus UPS status information on line power status, battery power status, battery charge level and voltage regulation operation Alarms: Audible alarm with 15-sec. delay sounds to indicate loss of utility power. Alarm can be silenced by pressing front panel alarm cancel button. Once silenced, alarm will re-sound when approximately 2 min. runtime remain. Switches: Includes 2 front panel switches—one main on/off power switch and one dual-function alarm cancel/self test button SURGE / NOISE SUPPRESSION AC surge suppression: 480 joules AC suppression response time: Instantaneous Dataline suppression: 3-line 2.2 GHz cable/satellite/antenna coaxial surge protection; single-line tel/DSL or Ethernet surge protection EMI / RFI AC noise suppression: Yes PHYSICAL Shipping weight (lbs): 31 Shipping weight (kg): 14.1 Unit weight (lbs): 29 Unit weight (kg): 13.2 Unit Dimensions (HWD/in): Tower format: 17.25 x 3.5 x 10.5 / Rackmount Shelf format: 3.5 x 17.25 x 10.5 Unit Dimensions (HWD/cm): Tower format: 43.8 x 8.9 x 26.7 / Rackmount Shelf format 8.9 x 43.8 x 26.7 Shipping Dimensions (HWD/in): 7 x 14.5 x 21 Shipping Dimensions (HWD/cm): 17.8 x 53.3 x 36.8 Material of construction: ABS Form factors supported: Rack/Tower Cooling method: Convection ENVIRONMENTAL Operating Temperature: +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius Storage Temperature: +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius Relative Humidity: 0 to 95%, non-condensing COMMUNICATIONS Network monitoring port: HID-compliant USB port and DB9 serial port. HID-compliant USB interface enables integration with built-in power management and auto-shutdown features of Windows and Mac OS X. Software and cabling included: USB cabling included; PowerAlert Software available for free download at www.tripplite.com WatchDog compatibility: Compatible with Tripp Lite's Watchdog system service to restore operation to locked equipment through soft reboot of application/OS or hard power off/on reboot of connected equipment; ideal for unattended kiosk applications LINE / BATTERY TRANSFER Transfer time from line power to battery mode: 2-4 milliseconds Low voltage transfer to battery power: Switches to battery power as line voltage decreases to 75V or less, switches back to AC mode as line voltage increases to 79V or higher High voltage transfer to battery power: Switches to battery mode as line voltage increases to 147V or higher, switches back to AC mode as line voltage decreases to 143V or lower CERTIFICATIONS Certifications: Tested to UL1778 (USA), CSA C22.2 No. 107.3 (Canada), NOM (Mexico), Class B (EMI), FCC part 68 and Industry Canada (US & Canada) WARRANTY Product warranty: 2 years Connected equipment insurance (USA and Canada Only): $250,000 SPECIAL FEATURES Cold Start: Inverter can be cold started to enable temporary AC output during a power failure Appearance: Attractive black color scheme |