HTR10-2U Pure Sine Wave UPS provides perfectly regulated sine wave output within 2% of 100/110/120V (user selectable) under all usage conditions
1000VA/800W power handling capacity compatible with micro display devices, projectors, PVRs/DVRs, media center PCs, music servers and other sensitive electronics
Removes harmonic distortion, fast electrical impulses, frequency variations and other hard-to-solve power problems not addressed by other UPS types
Corrects line voltage conditions as low as 65V and as high as 138V back to selectable 100/110/120V (+/-2%) values
2 switchable load banks (2 outlets each) enable remote outlet management for load shedding or remote reboot of individual devices
Single-line tel/DSL/Ethernet surge suppression
Internal battery set offers 18 min. runtime at half load (400W) and 6 min. a at full load (800W)
Optional BP48V60RT-3U external battery pack increases runtime to 252 min. at half load (400W) and 119 min. at full load (800W); multi-pack compatible
Optional BP48V24-2U external battery pack increases runtime to 126 min. at half load (400W) and 57 min. at full load (800W); limit 1
Fault-tolerant auto-bypass maintains continuous utility output to connected equipment, even in cases where the UPS suffers internal failure and requires maintenance
Compact rackmount form factor installs in 2 rack spaces (2U) with a maximum installed depth of only 19 in.
Offers simultaneous monitoring by up to 3 directly connected devices through included USB, DB9 and SNMP* interfaces (*requires optional SNMPWEBCARD), or the monitoring of any number of additional UPS systems over IP with included PowerAlert monitoring software
HID-compliant USB interface enables full integration with built-in power management and auto shutdown features of Windows, Mac OS X and Linux
PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, pager and email notification, event logging and running user-defined script commands
Front panel LEDs offer current monitoring and battery charge level information
UPS ships fully assembled in full compliance with DOT regulations; no time-consuming connection of internal batteries by user required
;)
;)