HTR07-1U AVR Series line-interactive UPS offers battery-derived sine wave AC output during power outages, voltage regulation during brownouts and overvoltages, plus network-grade AC surge suppression
750VA/450W power handling capability compatibile with micro display devices, projectors, PVRs/DVRs, media center PCs, music servers and other sensitive electronic devices
Maintains regulated 120V nominal output during brownouts as low as 83V and overvoltages as high as 147V
Large internal batteries offer 24 min. runtime at half load (375VA/225W) and 7 min. runtime at full load (750VA/450W)
Network-grade AC surge suppression protects sensitive A/V components from damage due to transient surges and improves componment performance (fuller audio/sharper video) by filtering disruptive EFI/RMI line noise
Includes 6 UPS-supported outlets with two single-outlet load banks that can be powered on and off via software interface
PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, pager and email notification, event logging and running user-defined script commands
Offers simultaneous monitoring by up to 3 directly connected devices through included USB, DB9 and SNMP* interfaces (*requires optional SNMPWEBCARD), or the monitoring of any number of additional UPS systems over IP with included PowerAlert monitoring software
Communication ports support messaging of UPS and line power status, including on-battery, low-battery, power restored, AC line voltage, DC battery voltage and remaining battery capacity
Supports Tripp Lite's WatchDog software application to restore unresponsive programs by systematically restarting applications, operating systems and ultimately rebooting completely locked computers by momentarily switching UPS power off and back on again (requires optional WATCHDOGSW)
Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter
Multi-function audible alarms and set of 5 front panel LEDs
Supports 1U rackmount and upright tower installation
UPS battery set ships fully assembled and ready for installation; no time-consuming connection of internal batteries by user is necessary
COMPLETE SPECIFICATIONS SYSTEM OVERVIEW System overview: HTR07-1U AVR Series line-interactive 1U rack/tower UPS protects connected equipment from blackouts, brownouts, surges and EMI/RFI line noise. Maintains AC output during blackouts and continuously corrects brownouts and overvoltages from 83V to 147V back to usable levels. Supports enhanced monitoring of UPS and line power conditions via built-in USB and DB9 ports, included PowerAlert monitoring software and complete cabling. Includes slot for SNMPWEBCARD accessory. Two single-outlet load management banks offer remote reboot of selected loads via software interface or automated load shedding to extendbattery runtime for the most critical loads during blackouts. Supports 1U rackmount and upright tower form factors with included mounting hardware. Voltage compatibility: 120 VAC Frequency compatibility: 60 Hz OUTPUT Output volt amp capacity (VA): 750 Output watt capacity (watts): 450 Output nominal voltage: 120VAC sine wave output in AC and battery mode Output voltage regulation: LINE MODE: Sine wave line voltage 120V (-21% +8%), BATTERY MODE: Sine wave output within 5% of 120VAC Output frequency regulation: LINE MODE: Passes line frequency of 60Hz +/-10% BATTERY MODE: Inverter output regulated to 60Hz +/-0.5Hz Outlet quantity / type: 6 x NEMA 5-15R Customized load management receptacles: 2 single-outlet load banks that support automated load shedding and remote reboot on demand of locked network devices. Configurable via PowerAlert software to automatically switch off optional loads, like monitors, to increase available runtime for servers and other critical devices. Overload protection: 15A input breaker INPUT Maximum input amps: 7A Input connection type: NEMA 5-15P Input cord length: 10 ft., 14 gauge Recommended electrical service: 15A 120V BATTERY Full load runtime: 7 min. (450 watts) Half load runtime: 24 min. (225 watts) DC system voltage: 24 VDC Typical battery lifespan: 3-6 years, depending on usage Battery recharge rate: 2-4 hours to 90% Replacement Battery Cartridge: RBC64-1U VOLTAGE REGULATION Voltage regulation description: Line-interactive voltage regulation system corrects input voltages between 83 and 147 back to usable 120V nominal levels. Overvoltage correction: Input voltages between 128V and 147V are reduced by 12% Brownout correction: Input voltages between 83V and 107V are boosted by 14% LEDS ALARMS & SWITCHES Front panel LEDs: 5 front panel LEDs - Green POWER LED, 3 color BATTERY CHARGE LED, 3 color OUTPUT LOAD LEVEL LED, red BATTERY WARNING LED. Alarms: 3-function audible alarm indicates power failure conditions (4 short beeps every 10 seconds), overload (continuous short beeps) and low battery (continuous tone) Switches: 2 front panel mounted push-button switches for system enable, self-test and alarm cancel functions SURGE / NOISE SUPPRESSION AC surge suppression: 480 joules AC suppression response time: Instantaneous EMI / RFI AC noise suppression: Yes PHYSICAL Shipping weight (lbs): 34 Shipping weight (kg): 15.4 Unit weight (lbs): 30 Unit weight (kg): 13.6 Unit Dimensions (HWD/in): 1.75 x 17.5 x 16.75 Unit Dimensions (HWD/cm): 4.45 x 44.5 x 42.5 Shipping Dimensions (HWD/in): 6.25 x 23.5 x 22.5 Shipping Dimensions (HWD/cm): 15.9 x 60 x 57.2 Material of construction: Steel Form factors supported: Supports 1U rackmount installation in 2- or 4-post racks; rackmount flanges are reconfigurable to support upright tower placement Cooling method: Built-in cooling fan Battery Access: Battery access door allows hot swap battery replacement without powering connected equipment off ENVIRONMENTAL Operating Temperature: +32 to +104 degrees Fahrenheit; 0 to +40 degrees Celsius Storage Temperature: +5 to +122 degrees Fahrenheit; -15 to +50 degrees Celsius Relative Humidity: 0 to 95%, non-condensing Line mode BTU/hr. (Max.): 39.2 Battery mode BTU/hr. (Max.): 133.0 COMMUNICATIONS Network monitoring port: 2 built-in monitoring ports, 1 USB and 1 DB9. Each supports on battery, low battery, power restored, AC line voltage, DC battery voltage, load percentage, battery charge current, battery capacity, internal UPS temperature and line frequency status messaging. Interface supports timed inverter shutoff after unattended shutdown, activate self-test and 10-second reboot of connected equipment. Supports reboot of all connected devices at once or via individual load banks via software interface. Compatible with Tripp Lite's PowerAlert and WatchDog software. Software and cabling included: PowerAlert UPS monitoring software for network and stand-alone operating systems; ships with complete USB and DB9 cabling. SNMP compatibility: Built-in accessory slot accommodates internal SNMP / Web card and other network accessories WatchDog compatibility: Compatible with Tripp Lite's Watchdog Software to restore operation to locked equipment through soft reboot of application / OS or hard power off/on reboot of connected equipment—ideal for unattended kiosk applications LINE / BATTERY TRANSFER Transfer time from line power to battery mode: 2-4 milliseconds Low voltage transfer to battery power: 83V (resets to line power as line voltage increases to 87V or higher) High voltage transfer to battery power: 147V (resets to line power as line voltage decreases to 143V or lower) CERTIFICATIONS Certifications: Tested to UL1778 (USA), Tested to CSA (Canada), Class A (emissions), NOM (Mexico) WARRANTY Optional coverage: 3-year, 5-year, next-day and on-site warranty coverage available for select opportunities Product warranty: 2 years Connected equipment insurance (USA and Canada Only): $250,000 SPECIAL FEATURES EPO port: EPO (Emergency Power Off) port and cable TVSS grounding: Back panel grounding point with thumbscrew for dataline surge suppressors and other network accessories requiring a safe grounding point Cold Start: Yes, inverter can be cold started to enable temporary AC output during a power failure Appearance: Attractive all-black color scheme
Size (OD):
OD= L-R: 17.5" x F-B: 16.75" x T-B: 1.75" (not incl rack ears)
;)
;)