- Single space rack mount power distributor
- Nominal line voltage: 120 VAC
- Maximum line current: 15 Amps
- Maximum allowable voltage: 125 VAC (RMS)
- Maximum continuous voltage differential applied between
line and neutral, line and ground, or neutral and ground
- Maximum multiple impulse current derated per specs
- Three protection modes: Line to neutral, line to ground, and
neutral to ground
-
- Peak impulse current (8/20 micro seconds):
- 10,000 amps, one time
- 7,000 amps, two times within 5 minutes
- 3,000 amps, ten times within 2 minutes
- Maximum peak impulse current pulse as defined between
line and neutral, line and ground, or neutral and ground
- Maximum multiple impulse current derated per spec
- Maximum clamping voltage: 395 volts@100 amps
- Response time: Instantaneous (Less than 1 nanosecond)
- EMI/ RF Suppression: More than 20 db
- Calculated line to neutral, 100 KHz to 1 MHz suppression
based upon nominal impedance
Size (ID):
1.75" (1 space)
;)
;)