• AC Current Capacity: Input - 15 Amp capacity required Output - 15 Amps RMS (both outlets combined)
• Linear Noise Attenuation: Transverse (Differential) Mode: > 40 dB from 10Khz. - 100 kHz. >80 dB from 100 Khz. – 1GHz. (Linear attenuation curve from 0.05 – 100 ohms line impedance)
• Transient Voltage Surge Suppression: 120 VAC - Series Multi-Stage Protection Non-Sacrificial with Zero Ground Contamination. (188 V peak clamping @ 6000V 3000A input) Extreme Voltage Shutdown (>135 VAC)
• Safety Agency Listing: C-UL (UL standard #1449) pending) 

  To view the datasheet: Click Here

  To view the manual: Click Here

    While the AC power delivered by today’s overworked and outdated power grid may be adequate for typical lighting and consumer products, it is well below the level of quality needed for connecting sensitive audio and video equipment. With the average investment in home theater equipment steadily rising, it’s more important than ever to purify or clean your incoming AC power. Furman’s Series Multi-Stage Protection Plus (SMP+) circuitry incorporates Linear Filtering Technology (LiFT) to insure that flat screen televisions, projectors, processors, and other sensitive audio/videoreduces noise, ensuring consistent, peak performance from your equipment.

The result is better performance, a better quality picture, and less wear on your components. Another feature unique to Furman’s SMP+ circuit is automatic Extreme Voltage Shutdown (EVS) with a TVZ MOV. Extreme voltages are statistically the most common, damaging AC event. The Extreme Voltage Shutdown circuit automatically turns off the AC-215 / AC-210 E when it is fed 137 volts [270VAC for the AC-210 E or 260VAC for the AC-210 E UK] or higher, protecting itself and connected equipment from the extreme voltage. Only Furman offers this advanced degree of protection.